Low power wireless sensor network for structural health monitoring of buildings using MEMS strain sensors and accelerometers

Within the MEMSCON project, a wireless sensor network was developed for structural health monitoring of buildings to assess earthquake damage. The sensor modules use custom-developed capacitive MEMS strain and 3D acceleration sensors and a low power readout application-specific integrated circuit (ASIC). A low power network architecture was implemented on top of an 802.15.4 media access control (MAC) layer in the 900MHz band. A custom patch antenna was designed in this frequency for optimal integration into the sensor modules. The strain sensor modules measure periodically or on-demand from the base station and obtain a battery lifetime of 12 years. The accelerometer modules record during an earthquake event, which is detected using a combination of the local acceleration data and remote triggering from the base station, based on the acceleration data from multiple sensors across the building. They obtain a battery lifetime of 2 years. The MEMS strain sensor and its readout ASIC were packaged in a custom package suitable for mounting onto a reinforcing bar inside the concrete and without constraining the moving parts of the MEMS strain sensor. The wireless modules, including battery and antenna, were packaged in a robust housing compatible with mounting in a building and accessible for maintenance such as battery replacement.

Jaar van publicatie:2012

Toegankelijkheid:Open