< Terug naar vorige pagina

Publicatie

Experimental Study on the Viscosity of Stainless Steelmaking Slags

Tijdschriftbijdrage - Tijdschriftartikel

© 2019 Iron and Steel Institute of Japan. All Rights Reserved. The influence of temperature, slag basicity and Cr 2 O 3 content on the viscosity of stainless steelmaking slags has been experimentally determined. The viscosity is mostly affected by the combination of basicity and Cr 2 O 3 content. The results are discussed by considering the Iida model for the fully liquid slag and the Herschel-Bulkley equation for the solid-bearing slag. For the liquid slag, the predicted viscosity values by the original Iida model do not agree very well with the measured ones, because the model does not include the amphoteric behavior of Cr 2 O 3 and underestimates the basic character of Al 2 O 3 . With the presently optimized parameters in the Iida model, the calculation is consistent with the measured viscosity values of the fully liquid slag with an error of 30%, which is fairly acceptable. At high basicity and high Cr 2 O 3 contents, the presence of solid particles in slag has a paramount influence on the viscosity. It was also found that the solid-bearing slags exhibit evident Bingham pseudoplastic behavior with a residual torque of 0.12 mNm and 0.99 mNm in the investigated samples.
Tijdschrift: ISIJ International
ISSN: 0915-1559
Issue: 3
Volume: 59
Pagina's: 404 - 411
Jaar van publicatie:2019
BOF-keylabel:ja
IOF-keylabel:ja
BOF-publication weight:1
CSS-citation score:1
Auteurs:International
Authors from:Higher Education
Toegankelijkheid:Open